24
•
Click on the
Cut Options
tab:
•
For initial testing of your Skycut, it is highly recommended that the test pen be used until you know, with
certainty, where shapes will draw.
•
After you have entered the settings you plan to use, click on
Done
and the
Vinyl Spooler
window will close.
•
Again click on the
Cut, Plot & Engrave Tools
icon
(6
th
from the left on the upper middle task bar)
and, this time, select
Send to Cutter
.
•
The following window opens. More about the settings on the left side of the window will be covered in
Section 2.03.
For now, just note where your shape will cut relative to the material and how to initiate the
exporting of the PLT file:
Change your
settings to the
ones shown
here
Select
Pen Tool
for initial testing
Pen drawing:
leave unchecked;
Cutting: Check
and enter settings
Click on
Done
