Fig.11
Slot
16
CAUTION!
NEVER change nozzles without locking the safety
lock on the trigger handle.
WARNING!
High-pressure jets can be dangerous if subject to
misusing. The jet must not be directed at persons, pets, live
electrical equipment, or the appliance itself.
To connect a nozzle to the spray wand:
1. Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
2. Engage the safety lock on the trigger handle by pushing
down on the safety lock until it clicks into the slot (Fig.11).
Safety lock
3. Snap the desired nozzle onto the Quick-Connect collar
until it clicks into place (Fig. 3)
To disconnect a nozzle from the spray wand once the
cleaning job is complete:
4. Turn off the pressure washer and shut off the water
supply. Pull the trigger to release water pressure.
5. Release the trigger and engage the gun safety lock
(Fig.11).
6. Remove the nozzle by placing your hand over the
nozzle while pulling back on the Quick-Connect collar.
WARNING!
Do not make changes to the nozzle while the
trigger is engaged. Doing so could result in damage
to the pressure washer or injury to the user.
