Operation
14
9
.
Check that the electrical supply voltage
and frequency (Volt/Hz) correspond to those specified on
the pressure washer rating plate. If the power supply is
correct, you may now plug the pressure washer into the
power outlet (Fig.9).
Fig.9
Reset
GFCI
Power light
indicator
NOTE:The GFCI may need to be reset when first plugged
into the electric outlet. Press the "Reset" button until the
power light indicator on the GFCI illuminates.
IMPORTANT!
This pressure washer is equipped with a micro-switch
sensitive to water flow. This Total Stop System (TSS) senses
water flow in the pump. When the trigger is released, water
stops flowing through the pump. The TSS then automatically
turns the motor off to protect the pump from overheating,
thus saving energy and prolonging pump life.
NOTE:THE RMAL SENSORA thermal sensor protects the
motor against overloading. The machine will restart
after a few minutes when the pressure washer cools down.
