Safety Devices
WARNING!
This high-pressure electric power washer must
not be used at temperatures below 32ºF (0°C).
WARNING!
Power cords on drums should always be
completely unwound to prevent the cord from overheating.
06
•Power cord connections should be kept dry and off the
ground.
•Keep the machine on a stable, flat surface during
operation,handling, transportation, and storage. Sudden
overturn of the machine can cause bodily injury.
•In the event of an accident or breakdown, switch off
the machine immediately. (If contacted with detergent,
rinse with an abundance of clean water.)
The unloader valve can reduce pressure if it exceeds preset
values. The spray gun features a locking device. When the
lock is activated, the spray gun cannot be operated.
1. Thermal sensor
A thermal sensor protects the motor against overloading.
The machine will restart after a few minutes when the
thermal sensor has cooled.
2. Ground fault circuit interrupter (GFCI) protection
A GFCI should be provided on the circuit(s) or outlet(s) to
be used for the pressure washer. Receptacles are available
having built-in GFCI protection and may be used for this
measure of safety.
3.
Do not use extension cords with this pressure washer.
The
unit comes standard with a 36 ft GFCI power cable to
meet the needs of daily use.
Electric shock may cause SEVERE INJURY or DEATH.
Heed these warnings:
•Do not allow any part of the electric pressure washer
to make contact with water while it is in operation. If
