Sungrow SG2500HV-30, Системное руководство

Страница: 33 / 120

25
The inverter should be hoisted by using four top corner fittings as shown in the following
figure.
IItte em m
R Re eq qu uiirre em me en ntt
S So ou urrc ce e
Lifting rope 1
The lifting rope can be a sling or a nylon
rope.
The lift ropes 1 must be the same in length
(≥ 3,500mm).
The load that a single rope 1 can
withstand, both should be ≥4000kg.
When the wire rope is selected, the tensile
strength of the wire rope 1.Strength not
less than 1670MPa, wire diameter not less
than 24mm.
Beyond the scope of
supply.
Lifting rope 2
The sling can choose flexible rope or nylon
belt.
The length of sling 2 must be the same,
both should be ≥4500mm.
The load that a single rope 2 can bear
should be ≥4000kg.
Beyond the scope of
supply.
Suspension
arm
Special tools In the scope of supply.
Wooden
blocks
-
In the scope of supply.
System Manual 5 Mechanical Installation