Sungrow SG2500HV-30, Системное руководство

Страница: 107 / 120

99
•
Paint RAL7035 / Munsell color JN-82 N8.2
F Fiig gu urre e S Stte ep p
1. Polish the damaged parts of the paint to
remove the surface rust or other roughness
2. Clean the target parts by rag with water
or use 97% alcohol to clean the surface
dust and dirty
3. When the surface is clean and dry, paint
the base material revealed parts with zinc
primer (or other local primers with the same
function) for protection. The paints should
cover the revealed primer completely
4. Paint the scratched parts by banister
brush when the primer is dry, and make
sure the painting is as uniform as possible
Check the protective paint on the module surface for peeling off. Re-paint the
inverter surface if necessary.
System Manual 12 Routine Maintenance