Sundray Wireless AP-S800 Installation Guide
17 / 20
(2)
Connect one end of the RF cable to the feeder lightning arrester and the other end to the
outdoor antenna.
Figure3-8 Connect RF Cable to Feeder Lightning Arrester
(3)
Connect a grounding wire to lightning arrester and then wrap the joint of lightning arrester
with waterproof tape.
3.6.2 Connecting Ethernet Cable
Figure3-9 Connect Ethernet Cable
Follow the following steps to connect an Ethernet cable:
(1)
An Ethernet cable needs to pass through a waterproof cover for waterproof purpose (an
Ethernet cable with a RJ-45 connector is unable to pass through), you need to make an
Ethernet cable connector on site.
(2)
Connect the Ethernet cable to the Ethernet port on the access point.
(3)
Tighten the waterproof cover.
(4)
Use waterproof tape to wrap the joint between the waterproof cover and the cable.