NO HEAT
1.
Check thermostat setting.
2.
Keep the cover in place while heating.
3. If “heater on” indicator is lit (Figure-E, Page
15), but no temperature rise is experienced
after a reasonable period of time, contact your
dealer or authorized service center.
CIRCULATION PUMP
1.
Circulation pump cycle canceled by power
OFF
interruption. Wait 24-hours for hot tub to
reset.
2.
Hot tub water is warmer than 95°F (35°C)
and two degrees warmer than the set
temperature. The “Summer Logic” safety
feature has activated. See note on page 28
for details.
Should checking the above steps fail to correct the problem, please call your
dealer so that he may arrange service.
Sundance builds the best hot tubs in the industry. Nonetheless, we are always
striving to improve the quality and features of our products. Your input as a
Sundance hot tub owner is a cherished part of this process. If you have any
comments or suggestions, or if you wish to be informed on any new products
for your hot tub, please write to us.
CONGRATULATIONS on your good taste and welcome to the happiest and
most relaxed family in the world!
Page 43
