Page 22
D.
Program Selection
Press source button (4) to cycle through available program sources as fol-
lows: Tuner - CD - Tuner. If a source is unavailable (e.g. no CD inserted),
that source will not appear on the display.
E.
Adjusting Bass Level
Press audio button (20) until display reads “BAS.” Rotate volume knob to
desired setting. A display of “C O” indicates center, -2 to -12 indicates
bass cut, and +2 to +12 indicates bass boost.
Note: unit returns to vol-
ume mode if volume control is not rotated for 3 seconds.
F.
Adjusting Treble Level
Press audio button (20) until display reads “TRE.” Rotate volume knob to
desired setting. A display of “C O” indicates center, -2 to -12 indicates tre-
ble cut, +2 to +12 indicates treble boost.
Note: unit returns to volume
mode if volume control is not rotated for 3 seconds.
G.
Adjusting Balance
Press the audio button (20) until display indicates “BAL.” Rotate volume
knob to desired setting. A display of “C O” indicates center, L1 to 15 indi-
cates left balance, R1 to 15 indicates right balance.
Note: unit returns to
volume mode if volume control is not rotated for 3 seconds.
Optional SunSound
TM
Stereo Receiver Radio Operation
A. Adjust Fader
Press audio button (20) until display reads “FAD.” Rotate volume knob to
desired setting. A display of “C O” indicates center, “R” 1 to 15 indicates
rear fade, “F” 1 to 15 indicates front fade.
Note: unit returns to volume mode
if volume control is not rotated for 3 seconds.
B. Display Clock
Press set button (9) to toggle display between clock and radio modes. When
clock mode is selected, the current time displays whenever the unit is left
undisturbed.
C. Set Clock
Press and hold set button (9) for 2 seconds until first time digit flashes on
display. Use tune/seek-up button (13) or tune/seen-down button (14) to set
hour, noting AM/PM indicator at left. Briefly press set button a second time
to select minutes display. Press set button a third time to complete
