OPEN OR SHORTED SENSOR (heater disabled)
The main sensor is non-functional. This must be
repaired only by a dealer or qualified service
organization.
CLOSED OR SHORTED FLOW SWITCH ON SYSTEM
STARTUP (system disabled) Flow switch is non-
functional. This must be repaired only by a dealer or
qualified service organization.
14.0 Troubleshooting - Procedures
In the unlikely event your hot tub is not working the way you believe it should,
please first review all the installation and operating instructions in this manu-
al and check the message on the panel display; second, if you are still not sat-
isfied it is working properly, please follow the appropriate troubleshooting
instructions.
PROBLEM PROCEDURE
NONE OF THE
Check the control panel lights.
COMPONENTS
1.
If there are letters or symbols displayed on the
OPERATE (i.e.
screen, refer to the previous section to determine
pump, light)
the meaning and action required.
2.
If nothing appears on the screen:
a. Check the household circuit breaker
b. Contact you dealer or authorized service center
PROBLEM PROCEDURE
PUMP DOES
Depress "JETS" sensor.
NOT OPERATE
1.
If no sound is detected or if a "buzzing" sound is
AND ICON DOES
detected, turn off power to the hot tub and
contact your dealer or service center.
2.
If motor operates but no water flows to jets:
a.
Pump may not be properly primed. See
instructions below.
b. Contact dealer or authorized service center.
Page 41
