Features
2.- Features
Timer delay
This function allows the start of the wash to be delayed, depending on
the model, up to a maximum of 19 hours.
Mix wash
This function reduces the temperature to 50ºC and increases the length of
the wash cycle so that all sorts of objects may be washed without being
damaged by high temperatures. This may only be selected in the normal
program and must be selected before the start-pause key has been pressed.
Selecting this option excludes the plus-dry option.
Half load
This function allows a half-load of dishes to be washed, using only the
upper basket (only the upper spray arm is used). This may be selected
for any program, even when the program is running, provided the pro-
gram has been paused.
Pre-diagnosis of faults
Once a fault has occurred, all the program LEDS will
fl
ash (0.5 sec. ON, 0.5 sec.
OFF) and the buzzer will start to beep a number of times depending on the corres-
ponding coded fault (according to the Safeties Table), cyclically (0.5 sec. ON, 0.5 sec.
OFF), where each sequence is followed by 1.5 sec. when it is OFF (silent) until the
door is opened. It will also be possible to ask the program for a pre-diagnosis of the
fault, by pressing the <
PROGRAMS
> key as many times as the user wishes. Once
the pre-diagnosis has been asked for and given, the buzzer will stay OFF (silent).
As well as beeping to indicate the fault, in the Lux models, the fault will be shown by
the 7 segment displays (according to the Safeties Table). In these models, Electronic
Card Failure will be shown as “F0” (since there are only 2 seven-segment display di-
gits so “F10” cannot be shown), although to all other purposes it is considered as F10,
for example, when this fault occurs, the buzzer will beep 10 times.
In no case must the <
ON/OFF
> switch be pressed, as it acts as a reset, and all the
information about the fault will be lost.
Important:
Depending on the range, optional wash features may be
included. These must be selected after the chosen wash program has
been activated.
Any change of program, even switching the machine off with the main
switch, annuls the wash features which had been selected.
I
