Description of all Functions
to increase the time delay, from 3H to 6H and 9H, and the corresponding LED pilot will
light up each time. Pressing once more annuls the delay, and the DELAY LEDs turn
off. This cycle may be repeated as many times as required.
Once the time delay has been selected, the time will count down from when the door
is closed.
The corresponding delay LED pilot will
fl
ash as it counts down from 9H to 3H (coun-
ting down every 3 hours).
The selected program will start once the time delay is over.
Once the delay has been con
fi
rmed, the program and options chosen may not be
changed, and the delay cannot be annulled. If one of these changes were required, it
would be necessary to turn the machine off (resetting it), using the main switch (<
ON/
OFF
>), and start programming the dishwasher from scratch.
Door open
Opening the door interrupts the wash, and all jets are turned off. The wash time
countdown is also stopped.
When the door is opened, the display (only on the Lux models) will show “
PH
”
fl
as-
hing, 0.5 sec. ON, 0.5 sec. OFF). If, after 2 min., the door has not been closed, the
alarm will sound, and the display will
fl
ash “
F1
” (0.5 sec. ON, 0.5 sec. OFF) and the
buzzer will sound intermittently (0.5 sec. ON, 1.5 sec. OFF) to indicate “Door Open”
(according to Safeties Table).
For the Delay option, when the door is opened, the countdown stops, and starts again
when the door is closed.
END State
When the End stage is reached, the corresponding pilot LED turns on (in Lux models,
the display shows “00”), and the buzzer beeps once, for 3 seconds.
In the End stage, no water jet is running.
The machine remains in this state until the main switch (<
ON/OFF
> key) is used to
reset it. This returns the dishwasher to its initial state (Program selection).
Options
Timer delay
(depending on Model):
Selected by pressing the corresponding key.
See the sections on Starting a wash with a time delay (Lux version and Standard
versions), for descriptions of how this operates.
