sunair RT-9000C, Руководство по эксплуатации и обслуживанию

Страница: 313 / 393

Document No. 8128000560
Software Revision – N1B (07 Oct 04)
7-81
RT-9000 B
7.3.4.7.1 Transmitting an ALL CALL
Depressing the ' * ' / 'ALE' key will cause the Feature Menu shown in Figure 7.3.4.13 to appear. Select the desired
Calling frequency (Channel) by rotating 'TUNING' knob until the desired is viewed.
Depress the ‘MORE’ key at
10 as shown in Figure 7.3.4.13. The Feature Menu Display will change to that
shown in Figure 7.3.4.14. Depress the ‘ALL-CALL’ key at 13 . The system will begin calling all Network
stations and the Operational Display will change to that shown in Figure 7.3.4.31.
Figure 7.3.4.31 ALE ‘ALL CALL’ - Initiating Station Display
Figure 7.3.4.32 ALE ‘ALL CALL’ – Initiating Station – ‘Transmit Scan Terminated’ Display
After the ALL CALL process is finished, the Operational Display will appear as shown in Figure 7.3.4.32. The
RT-9000 B will remain on the same frequency (Channel) used for the ALL CALL but the ALE system will be
inactive and displaying a ‘TX-SCAN TERMINATED’ message. The Feature Menu Display will appear as
shown in Figure 7.3.4.14. At this point, the Initiating Station may do the following:
a) Repeat the ALL CALL. Depressing the ‘ALL CALL’ key at 13 will re-transmit the ALL CALL on the
original frequency (Channel).
b) Repeat the ALL CALL on a different frequency (Channel). Manually select a new Channel by rotating
the ‘TUNING’ knob. Depress the ‘ALL CALL’ key again to re-transmit the ALL CALL on the new
Channel.
c) Perform other ALE operations.
d) Leave ALE Operating mode and return to the Main Menu. Depressing the ‘END’ key will cause the
RT-9000 B to immediately leave ALE mode, return to the Main Menu, and resume normal operation.
RCV MHZ
FUNCTION/
STATUS
CH 00 9.16717
CALLING ALL STATIONS
XMT
METER
S3 S6 S9 +20 +40 +60
20 60 100 150 FWD
RCV MHZ
FUNCTION/
STATUS
CH 00 9.16717
TX-SCAN TERMINATED
METER
S3 S6 S9 +20 +40 +60
20 60 100 150 FWD