sunair RT-9000C, Руководство по эксплуатации и обслуживанию

Страница: 241 / 393

Document No. 8128000560
Software Revision – N1B (07 Oct 04)
7-9
RT-9000 B
SECTION 7.3
OPERATION
7.3.1 GENERAL
This section provides the operator with the location and use of the RT-9000 B front panel controls for proper
utilization of the equipment. For convenience of discussion, functions are addressed in normal sequence.
However, it is not necessary to observe this order once the user becomes familiar with the equipment. Any
setting may be changed independently by referring to the appropriate section in this chapter pertaining to the
function in question. Reference to Figure 7.3.1.1 below, shows the location of the control groups, displays,
and their general purpose.
Figure 7.3.1.1 RT-9000 B Front Panel Controls
1 ON/OFF VOLUME CONTROL
When this control is in the full counter clockwise position, the equipment is OFF. To power-up the unit, rotate
the control clock-wise. Once on, the internal speaker audio output level is initially at minimum. Rotating the
volume control clock-wise increases the speaker audio output level.
NOTE: The setting of this control does not affect the level of the Remote Audio
Line outputs from the equipment rear panel.
RT-9000 B