Sun Oracle X3-2, Руководство по установке

Страница: 157 / 182

Configuring the Preinstalled Oracle VM 3.x Software 145
▼
Configure the Preinstalled Oracle VM
These instructions only describe how to configure the preinstalled Oracle VM Server
on your server.
Note – Oracle VM also has other components, such as Oracle VM Manager, that
must be installed or already running to support the virtual machine environment.
1. If you are not already logged in to Oracle ILOM, log in locally from a serial
connection or remotely using an Ethernet connection.
See “Connecting to Oracle ILOM” on page 63 .
2. Power on or reset the server, as follows:
■
To power on the server, use one of the following methods:
■
From the Oracle ILOM web interface Summary page , click the Power State
Turn On button.
■
From the Oracle ILOM CLI , type the following command from the prompt:
-> start /System
When prompted, enter
y
to confirm:
Network
configuration Static IP
address Supply the IP address for the server.
A static IP address is required.
Example: 172.16.9.1
Netmask If the server is part of a subnet,
supply the netmask of the subnet.
Example: 10.255.255.0
Gateway If the server is accessed via a
gateway, supply the IP address of the
gateway.
DNS server Supply the IP address for the domain
name server (DNS). One (and only
one) DNS is required.
Host name Supply the fully qualified domain
name for the server.
Example: myhost.us.example.com
TABLE:
Worksheet for Oracle VM Server Configuration (Continued)
Information for Configuration Description or Example Your Answers