Sun Oracle X3-2, Руководство по установке

Страница: 147 / 182

Configuring the Preinstalled Oracle Solaris 11 Operating System 135
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.
From the GRUB menu, you can choose whether you want to continue to direct the
display to the serial port, or whether you want to direct the display to a device
connected to the video port.
Note – By default, the system displays the output to the serial port. If you do not
select an option on the GRUB menu, after 10 seconds, the GRUB menu is no longer
available, and the system continues with the output directed to the serial port.
Note – To pause at the GRUB menu, press any key other than Enter.
4. From the GRUB menu, use the up and down arrow keys to select the display
option, and then press Enter.
Options include:
■
To display output to the serial port, select the following option:
s11_2011.11_a - Serial Port (tty)
■
To display output to the video port, select the following option:
s11_2011.11_a - Graphics Adapter
If you choose to display output to the video port, you must connect a device to
the VGA connector on the server and an input device (USB keyboard or mouse)
and then complete the configuration from that device. See
“Cabling the Server”
on page 57 for information about attaching devices to the server.
5. Follow the Oracle Solaris 11 installer on-screen prompts to configure the
software.
Use the information gathered in “Oracle Solaris Configuration Worksheet” on
page 131 to help you enter the system and network information as you are
prompted.
The screens that are displayed will vary, depending on the method that you chose
for assigning network information to the server (DHCP or static IP address).
After you have entered the system configuration information, the server completes
the boot process and displays the Oracle Solaris login prompt.
GNU GRUB Version 0.97 (607K lower / 2087168K)
s11_2011.11_a - Serial Port (ttya)
s11_2011.11_a - Graphics Adapter