manualshive.com logo in svg

Sun Oracle Storage Tek T10000, Справочное руководство

Поделиться
Скачать
Sun Oracle Storage Tek T10000 Скачать руководство пользователя страница 242

Security Protocol Out Command

224 

T10000: Interface Reference Manual  • January 2011

  • E20425-01

     

The device server shall terminate the command with CHECK 
CONDITION, with the sense key set to ILLEGAL REQUEST, and the 
additional sense code set to INCOMPLETE KEY-ASSOCIATED DATA 
SET. 

•

If a nonce value descriptor is included and the algorithm and the device 
server supports application client generated nonce values

The value in the KEY DESCRIPTOR field shall be used as the nonce 
value for the encryption process. 

•

If a nonce value descriptor is included and the encryption algorithm or the 
device server does not support application client generated nonce values, 

The device server shall terminate the command with CHECK 
CONDITION, with the sense key set to ILLEGAL REQUEST, and the 
additional sense code set to INVALID FIELD IN PARAMETER LIST.

The device server shall terminate the command with CHECK CONDITION, 
with the sense key set to ILLEGAL REQUEST, and the additional sense code 
set to INVALID FIELD IN PARAMETER LIST if an A-KAD or M-KAD is 
included and:

a. The encryption algorithm specified by the ALGORITHM INDEX field 

does not support A-KAD or M-KAD. 

If a device server processes a Set Data Encryption page with the 
ENCRYPTION MODE field set to DISABLE and DECRYPTION MODE field 
set to DISABLE or RAW, the physical device shall:

a. Release any resources that it had allocated to store data encryption 

parameters for the I_T nexus associated with the SECURITY 
PROTOCOL OUT command and shall change the contents of all 
memory containing a key value associated with the data encryption 
parameters that are released; and 

b. Establish a unit attention condition, if the key actually changes, with 

the additional sense of DATA ENCRYPTION PARAMETERS 
CHANGED BY ANOTHER I_T NEXUS for all other I_T nexus that has 
its registered for encryption unit attentions state set to one (see 
4.2.22.13) and is affected by the loss of the key, (i.e., any I_T nexus 
that is using a data encryption scope of PUBLIC and sharing the keys).

Содержание Storage Tek T10000









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды