Sun Oracle Netra SPARC T3-1B, Руководство по обслуживанию

Страница: 44 / 136

32 SPARC T3-1B Server Module Service Manual • July 2012
■
“Managing Faults (Oracle ILOM)” on page 12
■
“Interpreting Log Files and System Messages” on page 23
■
“Managing Faults (Oracle Solaris PSH)” on page 25
■
“Managing Components (ASR Commands)” on page 44
■
“Checking if Oracle VTS Software Is Installed” on page 48
POST Overview
POST is a group of PROM-based tests that run when the server module is powered
on or when it is reset. POST checks the basic integrity of the critical hardware
components in the server module (CMP, memory, and I/O subsystem).
You can also run POST as system-level hardware diagnostic tool. To do this, use the
Oracle ILOM
set
command to set the parameter
keyswitch_state
to
diag
.
You can also set other Oracle ILOM properties to control various other aspects of
POST operations. For example, you can specify the events that cause POST to run,
the level of testing POST performs, and the amount of diagnostic information POST
displays. These properties are listed and described in
“Oracle ILOM Properties That
Affect POST Behavior” on page 33 .
If POST detects a faulty component, the component is disabled automatically. If the
system is able to run without the disabled component, it will boot when POST
completes its tests. For example, if POST detects a faulty processor core, the core will
be disabled. After POST completes its test sequence, the system will boot and run
using the remaining cores.
Related Information
■
“Diagnostics Overview” on page 5
■
“Oracle ILOM Properties That Affect POST Behavior” on page 33
■
“Configure How POST Runs” on page 35
■
“Run POST With Maximum Testing” on page 37
■
“Interpret POST Fault Messages” on page 39
■
“Clear POST-Detected Faults” on page 40
■
“POST Error Message Syntax” on page 42