Sun Oracle Netra SPARC T3-1B, Руководство по обслуживанию

Страница: 42 / 136

30 SPARC T3-1B Server Module Service Manual • July 2012
▼
Clear PSH-Detected Faults
When the Oracle Solaris PSH technology detects faults, the faults are logged and
displayed on the console. In most cases, after the fault is repaired, the system detects
the corrected state and repairs the fault condition automatically. However, you
should verify this repair. In cases where the fault condition is not automatically
cleared, you must clear the fault manually.
1. After replacing a faulty FRU, power on the server module.
2. At the host prompt, use the
fmadm faulty
command to determine whether the
replaced FRU still shows a faulty state.
■
If no fault is reported, you do not need to do anything else. Do not perform the
subsequent steps.
■
If a fault is reported, continue to the next step.
# fmadm faulty
TIME EVENT-ID MSG-ID SEVERITY
Aug 13 11:48:33 21a8b59e-89ff-692a-c4bc-f4c5cccca8c8 SUN4V-8002-6E Major
Platform : sun4v Chassis_id :
Product_sn :
Fault class : fault.cpu.generic-sparc.strand
Affects : cpu:///cpuid=**/serial=*********************
faulted and taken out of service
FRU : "/SYS/MB"
(hc://:product-id=*****:product-sn=**********:server-id=***-******-*****:
chassis-id=********:**************-**********:serial=******:revision=05/
chassis=0/motherboard=0)
faulty
Description : The number of correctable errors associated with this strand has
exceeded acceptable levels.
Refer to http://sun.com/msg/SUN4V-8002-6E for more information.
Response : The fault manager will attempt to remove the affected strand
from service.
Impact : System performance may be affected.
Action : Schedule a repair procedure to replace the affected resource, the
identity of which can be determined using ’fmadm faulty’.