Sun Microsystems TurboGX, Руководство по установке

Страница: 51 / 82

Configuration Options B-17
B
Note – The order of the devices is important. The first device corresponds to
the left screen. The second device corresponds to the right screen. The names of
your devices
(
for example,
/dev/cgsix1
) may differ. Remember to use the
device file name that is appropriate for your system.
If you are running multiple screens, you should create a
.openwin-init
file
in the home directory to specify the screen on which each tool is to be
displayed. For example, you might put this into the
.openwin-ini
t file to
specify a Shell Tool window on each screen:
B.10 Running OpenWindows Version 3 with Multiple Monitors
If you have been running, OpenWindows Version 2, and want to switch to,
OpenWindows Version 3 (maximum of four monitors supported), refer to the
Open Windows installation procedure for detailed instructions. When Open
Windows Version 3 is installed you need to remove some of the “
.
” files. These
files are:
.xinitrc
,
.openwin_init
, and
.openwin_menu
.
To remove these “
.
” files:
Running multiple monitors with OpenWindows Version 3 is fairly easy and
simple. The OpenWindows Version 3 should already be installed.
1. Set up the OpenWindows Version 3 environment by typing the following
command (substitute for
/usr/local
variable tag the actual pathname
where OpenWindows Version 3 software is located):
export DISPLAY
DISPLAY=:0.0
shelltool -Wp 0 177 -Ws 594 692 -WP 56 9 +Wi &
DISPLAY=:0.1
shelltool -Wp 544 216 -Ws 593 461 -WP 165 7 +Wi &
example
%
rm ~/.xinitrc ~/.openwin-init ~/.openwin-menu