Sun Microsystems TurboGX, Руководство по установке

Страница: 47 / 82

Configuration Options B-13
B
The command line examples shown in this document use possible device file
names to refer to frame buffers. Remember to substitute the device file name
appropriate for your system.
B.7.1 Checking the Available Frame Buffers
If you do not know the names of the frame buffer devices present in your
system, you can check them by entering the following command:
This will display the system configuration including the types of available
frame buffers in your system and the slots they occupy. The list of messages
might be very long. Look for the lines that start with
cg
(for color frame
buffers) and
bw
(for black and white frame buffers).
Note – The execution of the aforementioned command may show too many
other messages; you may not even see the appropriate system configuration
messages shown below. If that is the case, you need to reboot your system.
After rebooting, repeat the command shown above.
example% /etc/dmesg | more
Oct 22 10:53
4SunOS Release 4.1.1-GFX-Rev2 (GENERIC_SMALL) #1: Sat Jul 6
16:23:04 PDT 1991
Copyright (c) 1983-1990, Sun Microsystems, Inc.
mem=1684k (ox100000)
.
.
cgsix0 at SBus slot 2 0x0 pri 7
cgsix0: screen 1152x900, single buffered, 1M mappable, rev 6
cgsix1 at SBus slot 3 0x0 pri 7
.
.