Sun Microsystems Sun Fire V890, Руководство по монтажу в стойку

Страница: 15 / 106

5
C H A P T E R
2
Installing the Server Into a 19-Inch
Cabinet
This chapter provides step-by-step instructions for installing the Sun Fire V890
server into a 19-inch (48.26-cm) wide EIA-compliant cabinet.
To install a Sun Fire V890 server into the cabinet, complete the following tasks in the
order listed:
■
Make sure you have completed the prerequisite tasks. See “Before You Begin” on
page 6 .
■
Prepare the server. See “Preparing the Server” on page 8 .
■
Prepare the cabinet. See “Preparing the Cabinet” on page 18 .
■
Install the tray assembly into the cabinet. See “Installing the Tray Assembly Into
the Cabinet” on page 18 .
■
Install the server into the tray assembly. See “Installing the Server Into the Tray
Assembly” on page 23 .
■
Make the server ready for operation. See “Restoring the Server” on page 28 .
■
Secure the tray handle to the cabinet rails. See “Securing the Server in the
Cabinet” on page 28 .
■
Install the trim strips. See “Installing Trim Strips” on page 30 .
■
Replace the front and back doors of the cabinet. See “Restoring the Cabinet” on
page 30 .
■
Develop the cable management scheme. See “Managing Cables” on page 31 .