Sun Microsystems StorEdge X6767A, Руководство по установке

Страница: 31 / 68

Chapter -7
Caution – Fiber optic cables have keyed connectors; they can only be inserted into
OT connectors as shown in FIGURE 1-4.
FIGURE 1-4
Connecting a Fiber Optic Cable to an OT Connector
6. Connect the other end of the fiber optic cable to a device such as an array, switch
or hub.
Refer to the documentation that came with the device for specific instructions.
7. Power on your peripherals and then your system.
Note –
When you power on the system, the LED lights on the host bus adapter
might blink. The LEDs are intended for manufacturing use only.
Note – If your system starts to reboot, interrupt the reboot process by pressing the
Stop-A keys.
The system should now be at the
ok
prompt. If a
>
prompt is showing, type
n
to
switch to the
ok
prompt.
8. Make sure that the system recognizes the Network Adapter.
Use either Method A or Method B.