Sun Microsystems StorEdge X6767A, Руководство по установке

Страница: 29 / 68

Chapter -5
4. Log in as
root
on your system.
5. Verify that the
SUNWses
,
SUNWssad
, and
SUNWvts
packages have been installed
on your system.
Use the
/usr/bin/pkginfo
command and
grep
for each of the above packages.
For example:
If you are missing any of these patches, you can get them from the Updates for
Solaris Operating Environment from your Solaris operating environment distribution.
6. Exit the operating environment.
To inform any mounted users that the system will be going down, use the
shutdown
command. Otherwise, use the
init 0
command. See the man pages for these
commands or the Solaris AnswerBook online documentation.
7. Power off the system.
Refer to the service documentation that came with your system.
Caution – Do not disconnect the power cord at this time. This connection provides
the ground path necessary to remove and install printed circuit boards and
components without damage.
8. Choose a slot into which to install the Network Adapter.
Follow the procedures in the documentation supplied with your system.
For systems that have more than one system board, you must also select and remove
a system board that has an available PCI slot. Refer to your system documentation
for specific instructions.
9. Attach the antistatic wrist strap to your wrist and to a metal component on the
system chassis.
The wrist strap between you and the chassis provides the ground path necessary to
safely remove and install the printed circuit boards and components without
damaging them.
10. For systems with a standby-type power switch, disconnect the power cord.
Standby-type power switches have a icon.
11. Open the system.
Refer to your system documentation for specific instructions.
# /usr/bin/pkginfo | grep SUNWvts
system SUNWvts Online Validation Test Suite