Supported Host Configurations
The Sun StorEdge S1 array is supported by the following configurations:
Single host
Daisy chain (four enclosure maximum)
Sun Cluster 2.2, 3.0
Refer also to the Sun StorEdge S1 Array Installation and Maintenance Manual. This guide contains
detailed information about correct SCSI cabling for the Sun StorEdge S1 array.
Sun StorEdge S1 Array Basic Configuration
Figure 10. Basic Configuration
Refer to the Sun StorEdge S1 Array Installation and Maintenance Manual for detailed information.
Sun StorEdge S1 Array Daisy Chain Configuration
The Sun StorEdge S1 array can be daisy chained as follows.
Server
Number
Cable Length
Netra T1 on−board SCSI
2
0.5 m right angle or 0.8 m straight
Netra t 1120/1125 on−board SCSI
1
0.8 m
Netra t 1400/1405 on−board SCSI
1
0.8 m
Sun Enterprise 220R, Sun Enterprise
280R, Sun Enterprise 420R on−
board SCSI
1
0.8 m
SCSI port on 10/100 Base T F/W
Ultra SCSI PCI adapter (X1032A)
2
2.0 m
(use 0.5m to daisy chain the second
unit)
Each SCSI port on dual SE SCSI
card (X6540A)
2
0.8 m
Sun StorEdge S1 Array
18
Just the Facts 9/27/01
