Requirements and Configuration
System Requirements
The Sun StorEdge S1 array requires Netra t1/T1,Netra t 1120/1125, Netra t 1400/1405, Netra ct 400/800,
Sun Enterprise 220R, 420R, 3500–6500, 10000, Sun Fire 280R, 15K, 3800−3600 servers, or other Sun
servers with an on−board Ultra3 SCSI LVD, Ultra2 SCSI LVD, or Ultra SCSI SE interface and/or host
adapter.
System Configuration
Standard Components Shipped with the Sun StorEdge S1 Array
The following pieces of hardware come as indicated with every Sun StorEdge S1 array:
One AC power cord (AC−version only)
Four DC plug connectors (DC−version only)
Appropriate country cable
Ultra SCSI cable
Rackmount brackets
Sun StorEdge S1 Array Configuration Guidelines
The Sun StorEdge S1 array is supported by the following host platforms.
Sun StorEdge S1 Array DC−Powered Version
Sun StorEdge S1 Array AC−Powered Version
Telecom Servers
•
Netra T1 Model 100
•
Netra t 1120 (Solaris 2.6, Solaris 7, Solaris 8
Operating Environments)
•
Netra t 1400
•
Netra ct 400/800
Netra Servers
•
Netra t1 Model 105
•
Netra T1 AC200
•
Netra t 112x
•
Netra t 140x
Enterprise Servers
(Solaris 2.6, Solaris 7, Solaris 8 Operating
Environments)
•
Sun Enterprise 3500 – 6500 (target Q3FY02)
•
Sun Enterprise 10000 (target Q3FY02)
•
Sun Fire 15K
•
Sun Fire 3800 – 6800 (target Q3FY02)
Workgroup Servers
•
Sun Enterprise 220R
•
Sun Fire 280R
•
Sun Enterprise 420R
Sun StorEdge S1 Array
17
Just the Facts 9/27/01
