manualshive.com logo in svg

Sun Microsystems StorEdge 3000 Series, Руководство по лучшим практикам

Поделиться
Скачать
Sun Microsystems StorEdge 3000 Series Скачать руководство пользователя страница 83

67

C H A P T E R

8

Combining Sun StorEdge 3510 FC 
Arrays and Sun StorEdge 3511 SATA 
Expansion Units

You can connect both Sun StorEdge 3510 and 3511 expansion units to a Sun StorEdge 
3510 RAID array. This makes it possible to combine fast, reliable online data 
processing with less expensive near-line storage and backup.

See the release notes and Installation, Operation, and Service Manual for your array 
for information about appropriate uses for these products and limitations on their 
use.

If you are using a Sun StorEdge 3510 FC array and wish to add Sun StorEdge 3511 
SATA expansion units, as many as five expansion units can be added. These can 
include any combination of Sun StorEdge 3510 expansion units and Sun StorEdge 
3511 expansion units. In contrast, if using only Sun StorEdge 3510 expansion units, a 
maximum of eight expansion units can be added to a Sun StorEdge 3510 array.

Restrictions on the Use of Expansion-
Unit Combinations

Some practices that involve combining Sun StorEdge 3511 SATA expansion units 
with Sun StorEdge 3510 FC arrays and expansion units are not supported. Observe 
the following restrictions.

■

Connect Sun StorEdge 3511 SATA expansion units only to host channels on the 
Sun StorEdge 3510 FC array that have been converted to drive channels. Do not 
use channels 2 and 3 for Sun StorEdge 3511 SATA expansion units. For 
information about converting host channels to drive channels, refer to the 

Sun 

StorEdge 3000 RAID Firmware User’s Guide

 for your array.

Содержание StorEdge 3000 Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды