Sun Microsystems StorEdge 3000 Series, Руководство по лучшим практикам

Страница: 44 / 86

28 Sun StorEdge 3000 Family Best Practices Manual • March 2007
FIGURE 4-3
Sample Single-Controller Sun StorEdge 3511 SATA DAS Connections
The general procedure for creating this configuration follows.
1. Check the position of installed SFP modules. Move or add SFP modules as
necessary to support the connections needed.
2. Connect expansion units if needed.
For information about connecting multiple expansion units, see “Sun StorEdge 3510
FC Array High-Capacity Configurations” on page 43 or “Sun StorEdge 3511 SATA
Array High-Capacity Configurations” on page 57 . For information about connecting
Sun StorEdge 3511 SATA expansion units to Sun StorEdge 3510 FC arrays, see
“Combining Sun StorEdge 3510 FC Arrays and Sun StorEdge 3511 SATA Expansion
Units” on page
67 .
3. Configure cache optimization.
4. Create one Logical Drive for each server and configure spare disks.
5. Map Logical Drive 0 to controller channel 0.
6. Map Logical Drive 1 (if created) to controller channel 5.
7. Map Logical Drive 2 (if created) to controller channel 1.
8. Map Logical Drive 3 (if created) to controller channel 4.
9. Connect the first server to controller port FC 0.
H/D/RCC
Server 3
Server 2
Server 1
Server 4