manualshive.com logo in svg

Sun Microsystems StorEdge 3000 Series, Руководство по лучшим практикам

Поделиться
Скачать
Sun Microsystems StorEdge 3000 Series Скачать руководство пользователя страница 60

44

    Sun StorEdge 3000 Family Best Practices Manual

 

• March 

2007

See 

“Sun StorEdge 3511 SATA Array High-Capacity Configurations” on page

 

57

 for 

information about adding expansion units to a Sun StorEdge 3511 SATA array.

These configurations work best when you select the highest-capacity disk available 
without exceeding maximum limits set by the firmware. Refer to the 

Sun StorEdge 

3000 Family FRU Installation Guide

 for information about supported disk drives, 

cables, SFPs, and other user-replaceable items.

The use of a full-fabric SAN configuration is highly recommended for host 
connections, as shown in 

“Full-Duplex SAN Configurations” on page

 

35

.”

Note – 

The following high-capacity configurations illustrate cabling techniques for 

drive ports. They must be combined with a standard configuration shown in this 
document, such as shown in 

“Redundant Point-to-Point SAN Configurations” on 

page

 

39

.

Limitations

■

Maximize the size of each logical drive before creating another logical drive. 
Otherwise the maximum number of 32 logical drives might limit future 
expansion.

■

Limiting the maximum number of expansion units on a Sun StorEdge 3510 FC 
array to 7 provides greater configuration flexibility. Doing so enables the use of 
up to 96 disks. 

■

If you stack a tabletop array and expansion units on top of each other, you can 
stack up to five physical units. Do not stack more than five physical units.

■

Many of these configurations require the use of optional extended-length cables, 
part number X9732A. Other items may also be required. Refer to the 

Sun StorEdge 

3000 Family FRU Installation Guide 

for information about supported cables, SFPs, 

and other user-replaceable items.

Содержание StorEdge 3000 Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды