Sun Microsystems StorageTek SL500 Скачать руководство пользователя

Страница: 284 / 436

Audits

252

SL500 User’s Guide • July 2008

Revision: KA • 96116

Audits

An audit is the process of reading and cataloging cartridges within a library, verifying

the locations of cartridges, or validating a range of slot locations. The library controller

maintains a cartridge database that contains the following information for all the

cartridges in the library:

■

Volume serial numbers (VOLID or VOLSER)

■

Current location (in library internal address format)

■

Verified status (true or false)

The library audits all cartridge locations in the storage and reserved areas at the

following times:

■

An audit request is made through the SL Console.

■

A host request to audit the library is entered.

You can use the SL Console to perform the following types of audits:

■

Physical Audit

■

Verified Audit

Caution –

System-level problems may occur if a host’s cartridge record does not match

what is in the library controller cartridge database.

Physical Audit

In a physical audit, the HandBot visits cartridge locations and verifies the VOLID of

resident cartridges, and the library controller updates the cartridge database. This audit

changes the “verified” status of the cartridge locations to “True.” Audit times vary

according to the size of the library.

The library performs a physical audit at the following times.

■

When initiated manually from the SL Console. There are two types of manually

initiated physical audits:

■

Entire library audit—The HandBot visits all cells (storage, CAP, and drive),

catalogs the VOLIDs and locations, and updates the library controller cartridge

database. This audit is a background process and so does not interrupt online

library operations. See

“Audit the Entire Library” on page 275

for details.

Estimated time for such an audit is from less than 10 minutes for a Base Module

to 30 minutes for a maximum size library.

■

Specific range audit—The HandBot visits only a specific range of cells (storage,

CAP, and drive) and updates the library controller cartridge database. The audit

information is displayed on the SL Console while the audit is performed. See

“Audit a Range of Cells” on page 277

for details.

Содержание StorageTek SL500





















































































































































































































































































































































































































































Результаты поиска

Содержание StorageTek SL500

Отзывы:

Похожие инструкции для StorageTek SL500

Бренды по названию

Популярные бренды

Sun Microsystems StorageTek SL500, Руководство пользователя

Результаты поиска

Содержание StorageTek SL500

Отзывы:

Похожие инструкции для StorageTek SL500

Бренды по названию

Популярные бренды