Sun Microsystems Netra t1 100, Руководство пользователя и администратора

Страница: 16 / 154

xvi Netra t1 User and Administration Guide • June 2000
Chapter 7 “Powering Up the Netra t1”
Tells you how to perform the initial power up and configuration of the Netra t1.
Chapter 8 “Using Different Versions of Solaris”
Tells you how to install different versions of Solaris.
Part II “Maintenance and Management”
Chapter 9 “Monitoring and Managing the System”
Tells you how to use the ‘Lights-Out’ Management (LOM) facility to power the
system on and off or reset it remotely and how to inspect status information about
the system’s fans and power supply. The chapter also tells you how to configure the
LOM facility to restart the system automatically in the event of a lock-up.
Chapter 10 “Maintaining the System”
Lists the Field Replaceable Units and optional accessories that you might want to
order for the Netra t1 during its life-time. If you ever need to replace an entire Netra
t1 system, the chapter also tells you how to retain the configuration information for
one system so that it can be transferred to another.
Chapter 11 “Troubleshooting”
Lists some problems that you might encounter setting up or using the Netra t1
system and tells you how to solve them.
Part III “Appendices”
Appendix A “Installing Additional Memory”
Tells you how to install more memory into the Netra t1.
Appendix B “Installing a PCI Card”
Tells you now to install a PCI card into the Netra t1.
Using UNIX Commands
This document does not contain information on basic UNIX
®
commands and
procedures such as shutting down the system, booting the system, and configuring
devices.
See one or more of the following for this information:
■
AnswerBook™ online documentation for the Solaris™ software environment
■
Other software documentation that you received with your system
SysAdmin.book Page xvi Friday, March 30, 2001 2:38 PM