Sun Microsystems Netra t1 100, Руководство пользователя и администратора

Страница: 11 / 154

Figures xi
FIGURE A-1
The 2-Stackable Memory Board Kit 102
FIGURE A-2
Lifting out the Processor Cover 103
FIGURE A-3
Removing the Mounting Screws from the Currently Installed Memory Board 104
FIGURE A-4
Removing the Old Screws and Inserting the New Ones 105
FIGURE A-5
Seating the Second Memory Board 106
FIGURE A-6
The 4-Stackable Memory Board Kit 108
FIGURE A-7
Lifting out the Processor Cover 109
FIGURE A-8
Removing the Mounting Screws from the Currently Installed Memory Board 110
FIGURE A-9
Seating a Single Memory Board on the Netra t1’s Motherboard 111
FIGURE A-10
Stacking the Third Memory Board on Top of the Second 112
FIGURE A-11
Aligning the Four Plastic Spacers with the Mounting Holes 112
FIGURE A-12
Mounting the Second and Third Boards onto the Base Memory Board 113
FIGURE A-13
Four Stacked Memory Boards on the Netra t1 Motherboard 114
FIGURE A-14
Dropping the Screws into the Aligned Mounting Holes 115
FIGURE B-1
Lifting out the Processor Cover 118
FIGURE B-2
Unclipping the Slide Retainer 119
FIGURE 11-1
Removing the Rear Screw and Pushing the Mid Baffle Towards the Front 119
FIGURE B-3
Lifting Out the Mid Baffle 120
FIGURE B-4
Removing a PCI Card 120
FIGURE B-5
Installing a PCI Card (viewed from the front) 121
FIGURE B-6
Replacing the Mid Baffle 122
FIGURE B-7
Using the Slide Retainer to Hold the Corner of the PCI Card in Place 123
FIGURE B-8
Replacing the Processor Cover 124
FIGURE B-9
Replacing the Lid 125
FIGURE B-10
Re-installing the Rack Mount Brackets 125
SysAdmin.book Page xi Friday, March 30, 2001 2:38 PM