Sun Microsystems Enterprise 3500, Руководство по установке

Страница: 17 / 53

Figure 1–3 Example of 10/100BASE-T (Twisted-Pair) Ethernet
Note -
Multiplexer boxes require a transceiver when used with the Ethernet
applications described in this manual. Although these transceivers are compatible
with Sun equipment, Sun Microsystems does not guarantee the performance of any
component that was not purchased from Sun.
Many transceivers are compatible with both level-1 and level-2 Ethernet. To operate
these transceivers with Sun equipment, set the device for level-2 operation following
the manufacturer’s instructions.
Sun equipment conforms to the Ethernet 10/100BASE-T standard, which states that
the 10/100BASE-T Link Integrity Test function should always be enabled on both the
host and the hub. If you have problems verifying connection between Sun equipment
and your hub, verify that your hub also has the link test function enabled. Refer to
“Failure of Network Communications” in the Sun Enterprise 3500 System Reference
Manual (part number 805-2630), and refer to the manual provided with your hub.
Preparing the Area
Use the following guidelines to prepare a location for your server.
4
The server unit requires approximately 1.5 feet (47 cm) of space in the front and
rear for access by service personnel (Figure 1–4).
Preparing for Installation
5