Sun Microsystems Enterprise 250, Руководство пользователя

Страница: 309 / 369

TABLE 12–7 (continued)
Message Type Description
Power supply X inserted
Advisory A hot-swap feature to tell you that
the power supply identified by X
was installed without service
disruption.
Power supply X removed
Advisory A hot-swap feature to tell you that
the power supply identified by X
was removed without service
disruption.
WARNING: Fan failure has
been detected
Warning Indicates a fan failure in the fan
tray assembly.
If the environmental monitoring system detects a temperature problem, it also lights
the temperature LED on the status and control panel. If it detects a power supply
problem, it lights the power supply fault LED on the panel. The LEDs located on the
power supplies themselves will help to further identify the problem. For information
about system LEDs, see:
4
“About the Status and Control Panel” on page 6
4
“Front Panel LEDs” on page 257
4
“Power Supply LEDs” on page 259
Note - Enterprise 250 power supplies will shut down automatically in response to
certain over-temperature and power fault conditions (see “Environmental Monitoring
and Control” on page 71). To recover from an automatic shutdown, you must
disconnect the AC power cord, wait approximately 10 seconds, and then reconnect
the power cord.
Diagnostics and Troubleshooting
275