Sun Microsystems Enterprise 250, Руководство пользователя

Страница: 296 / 369

Command Reference Manual. (An online version of the manual is included with the
Solaris System Administrator AnswerBook that ships with Solaris software.)
Solaris
prtdiag
Command
The
prtdiag
command is a UNIX shell command used to display system
configuration and diagnostic information. You can use the
prtdiag
command
to display:
4
System configuration, including information about clock frequencies, CPUs,
memory, and I/O card types
4
Diagnostic information
4
Failed field-replaceable units (FRUs)
To run
prtdiag
, type:
% /usr/platform/sun4u/sbin/prtdiag
To isolate an intermittent failure, it may be helpful to maintain a
prtdiag
history
log. Use
prtdiag
with the
-l
(log) option to send output to a log file in
/var/adm
.
Note -
Refer to the
prtdiag
man page for additional information.
An example of
prtdiag
output follows. The exact format of
prtdiag
output
depends on which version of the Solaris operating environment is running on your
system.
prtdiag
output:
ok /usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra Enterprise 250(2 X UltraSPARC-II 248MHz)
System clock frequency: 83 MHz
Memory size: 640 Megabytes
========================= CPUs ========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
SYS 0 0 248 1.0 US-II 1.1
SYS 1 1 248 1.0 US-II 1.1
========================= Memory =========================
Interlv. Socket Size
Bank Group Name (MB) Status
---- ----- ------ ---- ------
0 none U0801 32 OK
0 none U0701 32 OK
0 none U1001 32 OK
0 none U0901 32 OK
262
Sun Enterprise 250 Server Owner’s Guide
♦
Revision A, June 1998