Sun Microsystems Enterprise 250, Руководство пользователя

Страница: 229 / 369

CHAPTER
10
Administration and Networking
This chapter focuses on administrative tasks associated with Ethernet interfaces and
the disk array.
Tasks covered in this chapter include:
4
“How to Configure the Standard Ethernet Interface” on page 196
4
“How to Add an Ethernet Interface” on page 198
4
“How to Attach a Twisted-Pair Ethernet (TPE) Cable” on page 200
4
“How to Attach an MII Ethernet Transceiver” on page 202
4
“How to Boot the System Using the Standard Ethernet Interface” on page 204
4
“How to Boot the System Using a PCI-Based Ethernet Interface” on page 205
4
“How to Select the Boot Device” on page 207
Other information covered in this chapter includes:
4
“About Network Interface Options” on page 195
4
“About Disk Array Configurations and Concepts” on page 209
About Network Interface Options
The system’s main logic board provides an auto-sensing, switchable 10BASE-T/
100BASE-TX Ethernet interface conforming to the IEEE 802.3u Ethernet standard. The
interface configures itself automatically for either 10-Mbps or 100-Mbps operation,
depending on network characteristics.
Two rear panel connectors provide access to the Ethernet interface:
4
One RJ-45 connector for connecting a twisted-pair Ethernet (TPE) cable
195