Sun Microsystems Blade X6275 M2, Руководство по обслуживанию

Страница: 62 / 136

Note –
Alternately turn each screw 180 degrees at a time until the both screws are completely
loosened.
To separate the heatsink from the top of the CPU, gently wiggle the heatsink left and right, while
pulling upward.
See frame [3] of the illustration in Step 2 .
A thin layer of thermal compound separates the heatsink and the CPU. This compound also
acts as an adhesive.
Note –
Do not allow the thermal compound to contaminate the work space or other
components.
Use an alcohol pad to completely remove the thermal compound from the underside of the
heatsink.
Remove any dust from the heatsink fins.
Before you remove the CPU, use an alcohol pad to remove the thermal compound from the top
of the component.
See frame [4] of the illustration in Step 2 .
To release the processor cover retaining lever, push down on the end of the lever and move it
slightly away from the CPU.
See frame [5] of the illustration in Step 2 .
Lift the CPU cover to the fully open position and remove the CPU.
See frame [6] of the illustration in Step 2 .
“How to Install a CPU and Heatsink Assembly” on page 62
▼
How to Install a CPU and Heatsink Assembly
Note –
This component is a field-replaceable unit (FRU).
See “How to Remove a CPU and Heatsink Assembly” on page 60 .
Prepare the server module for service. See “How to Prepare the Server Module for Service”on
page 25 .
5
6
7
8
9
10
Next Steps
Before You Begin
1
Removing and Installing a CPU and Heatsink Assembly
Sun Blade X6275 M2 Server Module Service Manual • March, 2013 62