Sumo DTS 3m, Руководство оператора и список запасных частей

Страница: 31 / 68

31
5.3 Internal Data Card Module
Figure 37. SD Data Card Module
The internal data card reader accepts SD/MMC cards of up to 2Gb, to store data generated from
harvesting, soil sampling, or variable-rate treatment. It can also upload data e.g. treatment plans or
navigation data for soil sampling.
Typically, a 64Mb card can store data for up 2500 hectares.
Cards must have a directory called " Rds_data.xxx " in which all data is stored and retrieved. This
directory should be automatically created when you first insert the card into the Data Module. All PF data
is written to this directory. If the folder "Rds_data.xxx" is not created automatically, manually create it in
the normal way from Explorer.
NOTE :The bottom port is disabled when an SD card is inserted in the internal data card module. On removing the card, the port will revert
to the function configured on the PORT SETUP screen (Table 3).
5.4 GPS Receiver
5.4.1 ‘GPS 16’ GPS Receiver
RDS’s own GPS receiver for GPS position and
speed
The receiver comes fitted with a magnetic base.
Mounting on a plastic roof will require a metal base
plate (not included) to be attached by suitable
means. Run the combined antenna/power cable into
the cab.
Connect the lead directly to the top port.
NOTE: The lead also powers the unit .
Pro-Series port settings: Figure 38. RDS GPS receiver
Top Port:
‘GPS ONLY’
GPS Baudrate: 9600
After the initial power-on, allow up to 5 minutes for the receiver to automatically establish its
position. Subsequently the unit should establish position more quickly.
NOTE: The GPS icon at the top of the display indicates the status of the GPS signal.