Sumo DTS 3m, Руководство оператора и список запасных частей

Страница: 14 / 68

14
3.2 Main functions
The Artemis is designed to allow automatic, variable rate control of any drill. You can at any time,
also manually override the predetermined rate as field conditions require.
The basic functions are:

Variable Rate Control

Tramline Control

Forward Speed Alarms

Hopper Level alarm

Fan Speed & alarm

Information totals
The instrument has a special software routine that makes calibration of the metering unit(s) very easy. In
the calibration mode each metering unit is controlled via a ‘priming switch’ to dispense the product.
During normal operation the control system is started and stopped automatically via a magnetic sensor as
the drill is put into and taken out of work. Depending on the particular installation, this sensor is
triggered either by the operation of the lift/lower action or by the markers.