E N G L I S H
Nome file:
File name:
LIBRETTO ISTRUZIONI - MGR10009 - Angolo relax.doc
Rev. 0 28/12/2010
Pagina 12-di 26
The air hose (
Fig. 3
, # 11) must pass over the edge of the
pool
.
The
blower
must be raised off the bottom of the
pool
. (by at least 3 [cm],
Fig. 2
).
5.7. Reinstallation and reuse.
In the event of freezing risk, the product must be accurately emptied of all liquid in the air diffuser (
Fig. 3
, # 10).
5.8. Demolition and disposal.
Collecting recyclable material, both those used for packaging (cardboard, nylon, etc.) and those replaced during maintenance is recommended. Suitable
collection of waste material for recycling, processing and environmentally compatible disposal contributes in avoiding possible negative effects on the
environment and health and promotes the reuse and/or recycling of product materials.
Illicit product disposal by the user may be punishable by current international and/or national laws.
5.8.1. Electric/electronic waste disposal.
In keeping with art. 13 of Legislative decree nr. 151 dated July 25, 2005 “Implementation of Directives 2002/95/CE, 2002/96/CE and 2003/108/CE” on the
reduction of the use of hazardous substances in electric and electronic material as well as waste disposal. The barred bin symbol on the equipment or
packaging indicates that the product must be separated from other waste at the end of its working life. Therefore, the user must take equipment to electronic
and electro-technical waste collection centres at the end of its working life or return it to the dealer when purchasing similar new equipment, on a one to one
basis. Suitable collection of decommissioned equipment for recycling, processing and environmentally compatible disposal contributes in avoiding possible
negative effects on the environment and health and promote the reuse and/or recycling of device materials. Illicit product disposal by the user may be
punishable by current national laws.
6. Operations and use.
Do not use glue, sealant or other chemical products on threads or other product parts.
6.1. Operating description.
The product you purchased is designed to blow air in the
pool
. With this product your
pool
will become a comfortable
"spa" pool
.
6.2. Application range.
The product was designed and constructed to work with above-ground fresh-water
pools
installed outdoors.
6.3. Use.
Cutting, replacing and/or altering the power cord is strictly prohibited.
The product must only and exclusively be used to blow air in pools. It must be used for recreational purposes and installed as illustrated in the user manual.
The product cannot be used for medical/therapeutic purposes,
6.4. Operating limits and environmental limits.
•
Maximum working temperature: +40 [°C].
•
Minimum working temperature: 0 [°C].
•
Maximum water temperature: +40 [°C].
•
Minimum water temperature: +4 [°C].
•
Maximum water height: 1.3 [m].
The product can work continuously for about 20 minutes (time varies according to environmental conditions) until the
thermal protector
triggers. The product
resumes operations once the (
blower
) cools.
6.5. Hazards and risks.
The product is an electrical appliance. Therefore, the maximum diligence is required in installation and maintenance to ensure there are no hazards. Pay
careful attention to:
•
power cord conditions. It must not be damaged;
•
not leave the product unattended;
•
The product must be stored and used away from the elements;
•
water should never flow towards the
blower
.
•
the
check valves
should be positioned outside the
pool
and above the water level (Fig. 2).
7. User instructions.
7.1. Foreseen use and adjustments.
Proceed as follows to use the product:
1. connect the air hose (
Fig. 3
, # 1) to the
blower
using the bayonet connector (
Fig. 3
, # 3)
;
2. plug in the
power plug
in the
electrical socket
.
3. enter the water.
When finished using the product:
1. unplug the
power plug
from the
electrical socket
;
2. disconnect the air hose (
Fig. 3
, # 1) from the
blower
using the bayonet connector (
Fig. 3
, # 3)
;
3. store the
blower
away from the elements.
8. Routine, scheduled and extraordinary maintenance.
Do not lubricate and/or use detergents and/or chemical products to clean the product.
All extraordinary maintenance (replacing the power cord
, etc.
) must be performed by specialised technicians.
Before beginning any work, remember to unplug the
power plug
from the
electrical socket.
8.1. Routine maintenance.
Make sure the
blower
vent (
Fig. 3
, # 6) is always free to guarantee correct product ventilation,
Fig. 11
.
8.2. Extraordinary maintenance.
This consists in replacing worn or damaged parts (power cord,
check valve
, etc.).
If the power cord is damaged, it must be replaced by the manufacturer or its technical service centre or by personnel with similar qualifications, to prevent
any risks.
