E N G L I S H
Nome file:
File name:
LIBRETTO ISTRUZIONI - MGR10009 - Angolo relax.doc
Rev. 0 28/12/2010
Pagina 10-di 26
1. Content organisation and consultation methods.
1.1. Symbols.
Indicates hazardous situations and warnings. Carefully read the parts of the user manual marked with this symbol.
Indicates that work must not be performed on live electrical devices. This work may only begin after all suitable safety measures required by current
international and/or national regulations are taken.
1.2. Glossary.
•
Blower
: electromechanical device used to blow air.
•
Inlet
: product input (
Fig. 2
, IN).
•
Outlet
: the product’s exit (
Fig. 2
, OUT).
•
Flowrate
: the amount of fluid (air) that crosses a section in a unit of time.
•
Head
: the maximum elevation that a
blower
can exert with air.
•
Thermal protector
: the device that cuts of power to the product if the product overheats.
•
Residual Current Device
: also called fuse, it is an electro-technical device able to cut off the circuit in the event of fault.
•
Hydraulic parts
: components used to create the system where the product is used (pipes, valves, couplings, hose connections, etc.).
•
Pool
: artificial tank filled with water general intended for swimming or other aquatic activities.
•
"Spa" pool
: product used by one or more people simultaneously to be emerged in the water that includes devices to create air or water circulation and water
heating devices.
•
Power plug
: mechanical connector that can be inserted in a complementary electrical socket (
power outlet
).
•
Check valve
: a valve that permits a single flow direction.
2. General warnings and user information.
2.1. Warranty.
2.1.1. General aspects.
i. In accordance with these provisions, the dealer guarantees that the product covered by this warranty (“the product”) does not have any compliancy defect
upon delivery.
ii. The product is guaranteed for two (2) years from the date of delivery to the purchaser.
iii. If a product compliance defect is found and the purchaser informs the dealer during the warranty period, the dealer must repair or replace the product at
his own expense and where he deems most suitable, unless impossible or incommensurate.
iv. Should the product be irreparable or irreplaceable, the purchaser may request a proportionate price discount or, if the compliance defect is sufficiently
significant, the termination of the sales contract.
v. Parts replaced or repaired under this warranty do not extend the original product warranty period but are covered by their own guarantee.
vi. Proof of product purchase is required for warranty validity.
vii. After six months from product delivery to the purchaser and compliance defects are found, the purchaser must prove the origin and existence of the
defect.
viii. This warranty certificate does not restrict or jeopardise consumer rights provided by mandatory national regulations.
2.1.2. Special conditions.
i. This warranty covers the products referred to in this user manual.
ii. This warranty certificate only applies within the European Union.
iii. For warranty validity, the purchaser must strictly follow the manufacturer's instructions included in the documents that accompany the product, when
applicable according to the product range and model.
iv. Should a replacement, maintenance or cleaning schedule be specified for some product parts or components, the warranty is only considered valid if
these schedules are correctly observed.
2.1.3. Restrictions.
i. This warranty only applies to sales to consumers where "consumers" are the people who purchase the product for personal, and not professional, use.
ii. The warranty does not cover normal product wear. As for replaceable or consumable parts, components and materials such as rotors, bearings, light
bulbs, o-rings, gaskets, sponges, cartridges, etc., that provided in the documentation that accompanies the product shall be observed.
iii. The warranty is null and void in the event the product:
a.
is subject to incorrect treatment;
b.
was repaired, maintained or tampered with by unauthorised personnel or
c.
was repaired with non-original parts. Should the product compliance defect be consequent to incorrect installation or start-up procedures, this
warranty only applies when this installation or start-up procedure is included in the product sales contract and performed by the dealer or his
authorised personnel.
2.2. Returns.
In the event of defects, faults and malfunctions, the product must be returned to the deal with the completed claim report, where applicable.
2.3. General and safety warnings.
2.3.1. General warnings.
SHOTT International srl
continuously strives to improve its products. We trust the user will understand the technical modifications
SHOTT International srl
reserves the right to make on product shape and fittings.
SHOTT International srl
is not liable for any damages due to improper product use.
Carefully read and keep the user manual.
In order to increase energy savings, only use the product when necessary.
The following paragraphs include all the instructions necessary to best use the product according to your needs and to independently perform the cleaning
and maintenance operations that this type of product requires. The references (#) in parentheses correspond to the parts indicated in the diagram (see
Fig. 3
).
Upon product receipt and/or purchase, check packaging integrity. The product must be accompanied by the user manual. The user manual must be
complete.
In the event of malfunctions, consult the user manual and, if necessary, contact specialised technicians.
Failure to observe the instructions in this user manual immediately null and voids the warranty.
2.3.2. Safety warnings.
The product is not suited for people (even children) who suffer from physical, sensorial or mental handicaps or people who do not have sufficient experience
or training unless instructed on product use and assisted by a person in charge of their safety. Supervise children to ensure they do not play with the device.
Do not submerge the
blower
(
Fig. 3
, # 6) in water.
Before working on the product (
blower
,
Fig. 3
, # 6) for any reason, dry hands.
Before working on the product (
blower
,
Fig. 3
, # 6) for any reason, unplug the
power plug
from the
electrical socket
.
Packaging materials are not children’s toys. Films can be hazardous and cause suffocation.
Do not drink alcoholic beverages before, after and while swimming. Alcohol consumption may cause drowsiness, loss of consciousness and consequent
drowning.