Sumitomo Cyclo HBB, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 50

Cyclo® HBB
Operation & Maintenance Manual
15
Cyclo® HBB
Torque Arm Installation
Torque Arm Introduction, Clevis Type Torque Arm
A torque arm is a device used to prevent counter-rotation of the shaft mounted reducer/gearmotor during operation
The torque arm must always be installed in tension
Clevis Type Torque Arm
Fig 1 Clevis Type Torque Arm Parts
Table 5 Clevis Type Torque Arm Parts
1
3
2
4
5
6 6
11
10
9
6
2
4
7
8
Item Number Description Item Number Description
1 Flat Washer 7 Rubber Bushings
2 Mounting Brackets 8 Washers
3 Hex Bolt 9 Lock Washer
4 Spacer 10 Clevis Pin
5 Torque Rod 11 Cotter Pin
6 Nuts
Clevis Torque Arm Installation Procedure
1
Attach the torque arm assembly to the Cyclo® HBB using pin and cotter key.
• Position torque arm mounting bracket over the Cyclo® HBB corner eyelet.
• Insert
clevis pin through brackets and eyelet. Secure with cotter pin
2
Align torque arm with unit housing and tighten bolts
Insert bolt
Secure with
cotter pin
Tighten bolts
Align with housing