Sumitomo Cyclo HBB, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 50

40
Operation & Maintenance Manual
Cyclo® HBB
Cyclo® HBB
Cyclo® Portion Disassembly/Assembly
Cyclo® Disassembly Procedure
1
Before starting the disassembly process, Sumitomo recommends draining all lubricating oil from the Helical portion and also the Cyclo®
portion if it is oil lubricated
2
Carefully remove the entire Cyclo® HBB from the driven shaft by following the instructions outlined in the Removal From Driven Shaft
section of this manual
3
While carefully supporting the entire unit, place the unit on a level work surface so
that the high-speed portion (Cyclo portion) is facing down
4
While continuing to externally support the entire HBB unit, remove each of the bolts
from the Cyclo® ring gear housing
5
Carefully separate the
helical gear housing assembly
from the Cyclo® portion
to gain access to the
Cyclo® reduction components
Remove all bolts
Cyclo Reduction
Components