2
Introduction: How to Refer to the Maintenance Manual, Table of Contents
3
1. Receiving Inspection
CAUTION
- Unpack the unit after verifying that it is positioned right side up; otherwise, injury may result.
- Verify that the unit received is the one you ordered. Installing the wrong unit may result In per-
sonal injury or equipment damage.
- Do not remove the nameplate.
Verify the items listed below upon receiving the product. If a nonconformity or problem is found, please
contact with your nearest agent, distributor, or sales office.
[1] Does the information on the nameplate conform to what you ordered?
[2] Was any part broken during transport?
[3] Are all bolts and nuts tightened firmly?
1-1 Reading the Nameplates
When contacting the company, please provide [1]. Gearmotor nomenclature, [2]. Reduction ratio, and
[3]. Serial number.
MODEL
B.AMP
M.AMP
r/min
SERIAL No.
VOLTS
RATIO
MOTOR TYPE
OUTPUTRATING
RATING
B.TORQUE
FRAME
N
・
m
N
・
m
GEARMOTOR
SERVO
M/BTHERMAL
QR
code
AUT277G
A
M.RATING
N
・
m
Ｖ
[1] Gearmotor nomen-
clature (see P4)
[2] Reduction ratio
- Motor nomenclature
- Motor characteristics
- Brake current value
[3] Serial number
- Motor frame size
Figure 1-1 Nameplate
- Brake torque
1-2 Lubrication Method
All smartris models use grease lubrication, which is included when the product is shipped from the fac-
tory. Please use this product as-is.
