![background image](http://html1.mh-extra.com/html/sumec/0533201847zb/0533201847zb_service-manual_1390552008.webp)
8
FILLING WITH ENGINE FUEL
1. Clean the area around the gas filler cap before removing the cap. Remove
the warning tag, and check the fuel level (Fig.9).
2. Refill the tank if the fuel level is low.
3. Refuel carefully to avoid overfilling or spilling fuel. There should be no fuel in
the filler neck.
4. Clean up any overflow or splashes of gas before starting the engine.
5. Tighten the filler cap after filling: finger tight only (Fig.10).
OPERATION
STARTING AND STOPPING THE ENGINE
The density of air at high altitude is lower than at sea level. Engine power is
reduced as the air mass and air-fuel ratio decrease. Engine power will be
reduced for every 3000'/914 m of elevation above sea level. This is a natural