6
INSTALLING THE DISCHARGE CHUTE
Install the discharge chute assembly as shown in Fig. 3.
Make sure the discharge chute rotation handle and discharge chute is in the
correct position, tighten 3 screws with the cross-head screwdriver.
ADJUSTING THE CONTROL CABLE
Checking the Control Cable
Before each use, check the control cable and adjust it if necessary.
ADJUSTING THE CONTROL CABLE FIGS. 4/S
1. Stop engine and wait for all moving parts to stop and for hot parts to cool.
2. Move plastic sleeve up to auger control lever.
3. Remove cable end from adjustment bracket.
4. Insert Z-hook into highest adjustment bracket hole reachable.
5. Feed cable end through the adjustment bracket.
IMPORTANT:
When auger control lever is disengaged, there should be slight
slack in
the cable and no tension.
6. Start engine and engage auger control lever to ensure proper operation.
7. Release auger control lever and ensure paddle rotation stops.
