Sullivan-Palatek SP20 Скачать руководство пользователя страница 54

Страница: 54 / 117

PARTS CATALOG

8.1

ORDERING PARTS

On the following pages are a list of recommended spare parts to keep on hand to minimize downtime for

the most common maintenance and a complete parts listing with exploded drawings for all the parts on

the compressor.
Parts should be ordered from the nearest full-service distributor or factory authorized compressor center.

Only call the factory if parts cannot be obtained locally. before calling to order parts, please have the

model and serial number information available. This information can be found on the serial number plate

located on the compressor.

NOTE!

Use the space provided on the inside cover of the manual to record the model and serial number of the

compressor for future reference.

8.1.1 CONTACT INFORMATION

For replacement parts and manuals, contact us at:
Sullivan-Palatek, Inc.

1201 West US Highway 20

Michigan City, IN 46360

T: 219-874-2497

F: 219-872-5043

Toll Free: 800-438-6203

www.sullivanpalatek.com

8.2

PARTS DRAWINGS

The parts drawings are exploded drawings of the various assemblies and sub-assemblies which make up

this machine. Standard models and more popular options available are covered.

NOTE!

In referring to the rear, the front or to either side of the unit, always consider the starter face of the

compressor as the front. Standing at the starter face of the compressor (front) will determine the right and

left sides.

Содержание SP20






















































































































Результаты поиска

Содержание SP20

Отзывы:

Похожие инструкции для SP20

Бренды по названию

Популярные бренды

Sullivan-Palatek SP20, Руководство пользователя

Результаты поиска

Содержание SP20

Отзывы:

Похожие инструкции для SP20

Бренды по названию

Популярные бренды