Subaru S209 2019, Руководство по обслуживанию

Страница: 47 / 297

IN-17
Turbocharger
INTAKE (INDUCTION)
15) Lower the vehicle.
16) Install the intercooler stay RH No. 2.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
17) Install the intercooler.
18) Connect the battery ground terminal.
19) Fill engine coolant.
CAUTION:
• Restore the vehicle and warm up the engine.
Then check that there are no oil leaks or oil ooz-
ing from the following parts.
• Oil pipe unit
• Flare portion
• Banjo portion
• Ventilate the room when warming up the en-
gine.
• Engine and vehicle components are extreme-
ly hot. Be wary of receiving burns from heated
parts.
C: INSPECTION
1. WASTE GATE ACTUATOR
1) Remove the intercooler.
2) Remove the turbocharger upper cover.
3) Remove the boost hose (B) from the waste gate
actuator (A) of the turbocharger, and connect the
Mighty Vac to the waste gate actuator (A).
4) Pressurize slowly with the Mighty Vac, and mea-
sure the pressure when the control rod stroke (D)
becomes 4 mm (0.16 in). If it is not within the stan-
dard, replace the turbocharger assembly.
CAUTION:
Do not pressurize over 130 kPa (1.33 kg/cm
2
,
18.8 psi) to prevent damaging the waste gate
actuator.
Operating pressure (control rod stroke 4 mm
(0.16 in)):
Standard
113 — 128 kPa (1.15 — 1.31 kg/cm
2
, 16.4 —
18.6 psi)
EX-00007
EX-02662
(A) Waste gate actuator
(B) Boost hose
(C) Control rod
(D) Control rod stroke
(C)
(B)
(A)
(D)
AA-15015