Subaru S209 2019, Руководство по обслуживанию

Страница: 96 / 297

FS-2
General Description
FRONT SUSPENSION
1. General Description
A: SPECIFICATION
1. FRONT ALIGNMENT (INSPECTION VALUE)
2. REAR ALIGNMENT (INSPECTION VALUE)
NOTE:
• Adjust with the value less than the inspection value, taking aging variation into consideration.
• Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds
the tolerance range of the specification chart.
• Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart
cannot be adjusted.
• If other items exceed the tolerance range of the specification chart, check the suspension parts and con-
nections for deformation. If defective, replace with new parts.
A – B = Positive: Toe-in, Negative: Toe-out
Tire size 265/35R19
Wheel arch height
(Tolerance:
+12 mm
–24 mm
(
+0.47 in
–0.94 in
))
mm (in) 359 (14.13)
Camber (tolerance:

0°30

Differences between RH and LH: 35

or
less)
–1°05

Caster (referential value) 6°38

Steering angle (tolerance:

1.5°)
Inner wheel 32.0°
Outer wheel 28.6°
Toe-in mm (in)
OUT 2

3 (OUT 0.08

0.12) Toe angle (sum of both
wheels): OUT 0°10

0°16

Kingpin angle (referential value) 15°37

Tire size 265/35R19
Wheel arch height
(Tolerance:
+12 mm
–24 mm
(
+0.47 in
–0.94 in
))
mm (in) 351 (13.82)
Camber (tolerance:

0°45

Differences between RH and LH: 45

or
less)
–1°50

Toe-in mm (in)
0

3 (0

0.12)
Toe angle (sum of both wheels): 0°

16

Thrust angle (tolerance: 0°00

30

) 0°00

A
B
FS-00657
B
A