Subaru S209 2019, Руководство по обслуживанию

Страница: 247 / 297

EI-59
Side Garnish & Side Spoiler
EXTERIOR/INTERIOR TRIM
CAUTION:
Apply EPICON primer or equivalent to the scratched area using a brush.
(14) Dry the EPICON primer or equivalent well.
CAUTION:
Confirm that there are no cracks on the EPICON primer or equivalent.
(15) Apply NOX-RUST (7703WJ) or equivalent to the drilled hole edge on the rear quarter outer side.
CAUTION:
Apply sufficient amount of the NOX-RUST (7703WJ) or equivalent to an extent that the color of the
EPICON primer or equivalent cannot be seen.
(16) If the NOX-RUST (7703WJ) or equivalent is spilled, wipe it off.
2) Clean and degrease the rear quarter garnish attachment area on the rear quarter outer.
NOTE:
• When the ambient temperature is 15°C (59°F) or less, heat the entire part of double-sided tape and the at-
tachment area to approx. between 25°C and 40°C (77°F and 104°F) using a heat light, etc.
• Heating a particular small area will cause deformation of the parts.
3) Install the rear quarter garnish.
(1) Attach a masking tape to the bolt tip.
CAUTION:
Be sure to protect as instructed; otherwise the bolt tip may be damaged.
(2) Peel off the backing sheet (a) on the rear quarter garnish.
(a) Rear quarter outer side (c) Hole of 9.5 mm (0.37 in) diameter (e) Arch rear inner
(b) EPICON primer application area (d) Rear quarter outer
AA-10054
(e)
A-A
(a)
(b)
(d) (c)
(b)
A
A
(c)